PLA Sparkle
Bambu Lab
$24.99
(No reviews yet)
Write a Review
Bambu Lab
PLA Sparkle
AMS Compatable!
0.2 mm Nozzle Not Compatible
- Special Sparkling Look
- Relatively High Impact Strength
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Recommended Print Settings:
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with Glue) | 35 - 45 °C |
| Printing Speed | < 250 mm/s |
Physical Properties:
| Density | 1.26 g/cm³ |
| Vicat Softening Temperature | 57 °C |
| Heat Deflection Temperature | 55 °C |
| Melting Temperature | 156 °C |
| Melt Index | 34.2 ± 3.3 g/10 min |
Mechanical Properties:
| Tensile Strength | 33 ± 3 MPa |
| Breaking Elongation Rate | 11.7 ± 0.7 % |
| Bending Modulus | 2310 ± 140 MPa |
| Bending Strength | 63 ± 4 MPa |
| Impact Strength | 66.5 ± 3.6 kJ/m² |
