PLA Silk
Bambu Lab
$24.99
(No reviews yet)
Write a Review
Bambu Lab
PLA Silk
Note: PLA Silk has been discontinued and will not be restocked. A new and improved PLA Silk is on the way! Stay tuned for updates!
AMS Compatable!
- Silk-like Finish with Ultra High Gloss
- Better Breakage Resistance (Filament)
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Recommended Print Settings:
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 210 - 240 °C |
| Bed Temperature (with Glue) | 35 - 45 °C |
| Printing Speed | < 250 mm/s |
Physical Properties:
| Density | 1.27g/cm³ |
| Vicat Softening Temperature | 66 °C |
| Heat Deflection Temperature | 60 °C |
| Melting Temperature | 158 °C |
| Melt Index | 14.5 ± 1.2 g/10 min |
Mechanical Properties:
| Tensile Strength | 33 ± 4 MPa |
| Breaking Elongation Rate | 2.8 ± 0.6 % |
| Bending Modulus | 2460 ± 150 MPa |
| Bending Strength | 75 ± 4 MPa |
| Impact Strength | 18.5 ± 1.6 kJ/m² |
