PLA Basic Refill
Bambu Lab
$19.99
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 4 - 9 and get $5.00 off
- Buy 10 or above and get $6.00 off
THIS IS A REFILL
(No reviews yet)
Write a Review
Bambu Lab
PLA Basic Refill
AMS Compatable!
- Easy to Print & Beginner Friendly
- Smooth Surface Finish
- Biodegradable
- Diameter: 1.75mm +/- 0.03mm
Recommended Print Settings:
| Drying Settings before Printing | 55 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with PVP Glue) | 35 - 45 °C |
| Printing Speed | < 300 mm/s |
Physical Properties:
| Density | 1.24 g/cm³ |
| Vicat Softening Temperature | 57 °C |
| Heat Deflection Temperature | 57 °C |
| Melting Temperature | 160 °C |
| Melt Index | 42.4 ± 3.5 g/10 min |
Mechanical Properties:
| Tensile Strength | 39 ± 2 MPa |
| Breaking Elongation Rate | 12.2 ± 0.4 % |
| Bending Modulus | 2750 ± 60 MPa |
| Bending Strength | 76 ± 3 MPa |
| Impact Strength | 26.6 ± 2.8 kJ/m² |
