PETG HF Refill
Bambu Lab
$19.99
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 4 - 9 and get $5.00 off
- Buy 10 or above and get $6.00 off
(No reviews yet)
Write a Review
Bambu Lab
PETG HF Refill
AMS Compatable!
Recommended to dry out before use
- Designed for Speed
- Print Flawlessly with Minimal Tuning
- Smooth, Soft Texture
- Ready for Outdoor Use
- Diameter: 1.75 mm +/- 0.03 mm
Recommended Print Settings:
| Drying Settings (Blast Drying Oven) | 65 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 230 - 260 °C |
| Bed Temperature (with Glue) | 65 - 75 °C |
| Printing Speed | < 300 mm/s |
Physical Properties:
| Density | 1.28 g/cm³ |
| Vicat Softening Temperature | 70 °C |
| Heat Deflection Temperature | 69 °C |
| Melting Temperature | 214 °C |
| Melt Index | 28.2 ± 2.7 g/10 min |
Mechanical Properties:
| Tensile Strength | 34 ± 4 MPa |
| Breaking Elongation Rate | 8.6 ± 1.2 % |
| Bending Modulus | 2050 ± 120 MPa |
| Bending Strength | 64 ± 3 MPa |
| Impact Strength | 31.5 ± 2.2 kJ/m² |
