PETG Basic With Spool
Bambu Lab
$22.99
(No reviews yet)
Write a Review
Bambu Lab
PETG Basic With Spool
No restocks, Current stock is final
AMS Compatable!
Recommended to dry out before use
- Less oozing, Stringing and Clumping
- Water & Impact Resistance
- Long-lasting Durability
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Recommended Print Settings:
| Drying Settings (Blast Drying Oven) | 65 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 240 - 270 °C |
| Bed Temperature (with Glue) | 65 - 75 °C |
| Printing Speed | < 200 mm/s |
Physical Properties:
| Density | 1.25 g/cm³ |
| Vicat Softening Temperature | 78 °C |
| Heat Deflection Temperature | 69 °C |
| Melting Temperature | 225 °C |
| Melt Index | 18.6 ± 2.2 g/10 min |
Mechanical Properties:
| Tensile Strength | 32 ± 4 MPa |
| Breaking Elongation Rate | 11.2 ± 0.8 % |
| Bending Modulus | 1670 ± 120 MPa |
| Bending Strength | 65 ± 4 MPa |
| Impact Strength | 52.7 ± 2.4 kJ/m² |
