ABS With Spool
Bambu Lab
$22.99
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 4 - 9 and get $5.00 off
- Buy 10 or above and get $6.00 off
(No reviews yet)
Write a Review
Bambu Lab
ABS With Spool
AMS Compatable!
Enclosure Printers Required
- Tough and Durable
- Good Heat & Freezing Resistance
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Recommended Print Settings:
| Drying Settings (Blast Drying Oven) | 80 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed，with Desiccant) |
| Nozzle Temperature | 240 - 270 °C |
| Bed Temperature (with Glue) | 80 - 100 °C |
| Printing Speed | < 300 mm/s |
Physical Properties:
| Density | 1.05 g/cm³ |
| Vicat Softening Temperature | 94 °C |
| Heat Deflection Temperature | 87 °C |
| Melting Temperature | 200 °C |
| Melt Index | 34.2 ± 3.8 g/10 min |
Mechanical Properties:
| Tensile Strength | 33 ± 3 MPa |
| Breaking Elongation Rate | 10.5 ± 1.0 % |
| Bending Modulus | 1880 ± 110 MPa |
| Bending Strength | 62 ± 4 MPa |
| Impact Strength | 39 ± 3.6 kJ/m² |
